This job we did this week was for a bathroom and kitchen vent. we were hired to fully connect the ducting line and patch the roof to connect to a flapper vent, or also known as direct venting, or designated venting.
Why is it important to properly vent the bathroom, laundry, microwave, and kitchen fans to vent to the outside of the home on designated flapper vents.

It’s important to make sure all ducting lines for bathroom, laundry, and kitchen vents are fully connected and properly exhausting to the exterior of the home. Disconnected ducts can release warm, moist air into the attic, leading to condensation, mold growth, wood deterioration, and potential damage to the roof structure. Properly connected ducting helps remove moisture, odors, and airborne contaminants from the home while helping protect your attic and roofing system from preventable damage.



Make sure the bathroom fan duct is securely connected from the fan outlet all the way to the top of the new roof vent to prevent warm, moist air from escaping into the attic. The ducting should also be properly supported and kept as straight and taut as practical, without excessive slack or low spots where moisture can collect. Poorly connected or sagging ductwork can allow condensation to build up, potentially causing water to drip back into the attic or through the ceiling and contribute to mold or moisture damage. Proper connections and installation help ensure moisture is safely exhausted outside the home, protecting your attic, roof structure, and indoor air quality.

The new direct-connect bath and kitchen roof vents may look different from the older square roof vents you are used to seeing. Traditional square vents often allow ducting to simply release air into the general area beneath the vent, whereas these newer vents are designed to connect directly to the ducting line. The duct should run all the way to the vent connection so that moist air is exhausted directly outside rather than escaping into the attic. Because of this different design, the new vents may have a different appearance on your roof, but they provide a more direct path for exhausting moisture when properly installed.

These new direct-connect roof vents typically have a small hood-like appearance, making them look different from traditional square roof vents. When you turn on your bathroom or kitchen exhaust fan, a small flapper inside the vent opens to allow moist air to escape directly outdoors. When the fan is turned off, the flapper closes to help prevent outside air, pests, and debris from entering. So, if you happen to notice one of these little hood-shaped vents on your roof in the future, now you know what it is, how it works, and why it’s there!
for more information on how to install these yourself on your home, please click the link https://www.energy.gov/sites/default/files/2022-07/job-aid-25-1_install-roof-vent.pdf
or if you would like our help with this work you can always book a free appointment at www.portlandroofingco.com or call to book at 503-490-3994
